Connecting Your TV to Ace Digital TV Service

ADB3800-picture-(2)

Untitled-1

#1: Power Input
#2: Attach COAX Cable:
Attach the COAX cable from the back of the cable box port shows to the back of the TV COAX INPUT. For picture, tune TV to channel 3 or 4. Do not plug the COAX cable into the wall when using ACE service.

#3: Plug in Ethernet Cord:
Plug the ethernet cord into the port shown above (labeled as Ethernet) and plug the other end into the BLUE video jack located in the room

#4: Attach video/audio
Attach the yellow, red, and white ends from the back of the cable box port shown above to the matching colored video inputs in the back of the TV. For picture, set the TV to the appropriate video input.

IMPORTANT: Use ONLY one cable from the set-top box to the back of the TV. Choose the COAX cable OR the Audio/Video (yellow/red/white) cord. If your set-top box is a different model, the inputs should be similar

Learn More

Connecting Your TV to Ace Digital TV Service

ADB3800-picture-(2)

Untitled-1

#1: Power Input
#2: Attach COAX Cable:
Attach the COAX cable from the back of the cable box port shows to the back of the TV COAX INPUT. For picture, tune TV to channel 3 or 4. Do not plug the COAX cable into the wall when using ACE service.

#3: Plug in Ethernet Cord:
Plug the ethernet cord into the port shown above (labeled as Ethernet) and plug the other end into the BLUE video jack located in the room

#4: Attach video/audio
Attach the yellow, red, and white ends from the back of the cable box port shown above to the matching colored video inputs in the back of the TV. For picture, set the TV to the appropriate video input.

IMPORTANT: Use ONLY one cable from the set-top box to the back of the TV. Choose the COAX cable OR the Audio/Video (yellow/red/white) cord. If your set-top box is a different model, the inputs should be similar

Learn More

Connecting Your TV to Ace Digital TV Service

ADB3800-picture-(2)

Untitled-1

#1: Power Input
#2: Attach COAX Cable:
Attach the COAX cable from the back of the cable box port shows to the back of the TV COAX INPUT. For picture, tune TV to channel 3 or 4. Do not plug the COAX cable into the wall when using ACE service.

#3: Plug in Ethernet Cord:
Plug the ethernet cord into the port shown above (labeled as Ethernet) and plug the other end into the BLUE video jack located in the room

#4: Attach video/audio
Attach the yellow, red, and white ends from the back of the cable box port shown above to the matching colored video inputs in the back of the TV. For picture, set the TV to the appropriate video input.

IMPORTANT: Use ONLY one cable from the set-top box to the back of the TV. Choose the COAX cable OR the Audio/Video (yellow/red/white) cord. If your set-top box is a different model, the inputs should be similar

Learn More